LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> GLK350 Base >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System - Body - 204 Chassis - 1 Of 6 >> Basic Knowledge >> Voice control, function >> Voice control, function - GF82.70-P-3020CEA

Voice control, function - GF82.70-P-3020CEA

MODEL 204.0/2 with CODE (527) COMAND APS with single DVD drive (with navigation) as of model year 2009/YoM 08 

MODEL 204.0/2 with CODE (512) COMAND APS with DVD changer as of model year 2009/YoM 08 

MODEL 204.3/9 with CODE (527) COMAND APS with single DVD drive (with navigation) 

MODEL 204.3/9 with CODE (512) COMAND APS with DVD changer 

Function requirements for voice control, general 

Voice control, general 

The individual functions of the driver information system are called up and operated via the voice control system (VCS [SBS]). The VCS [SBS] is integrated in the COMAND controller unit (A40/3).

The voice control can be activated or deactivated using the following buttons on the multifunction steering wheel (MFL):

The system can be controlled by voice by spelling out or entering complete words.

Voice control function sequence 

The control signals of the VCS [SBS] on button are forwarded over the following components to the COMAND controller unit:

The voice input takes place via the hands-free system microphone (A67b1), which is connected to the COMAND controller unit via a direct line. The words spoken into the hands-free system microphone are converted into an electrical signal and forwarded to the COMAND controller unit.

On vehicles except code (810) Sound system, the voice output is performed by the COMAND controller unit via direct lines and the following speakers:

On vehicles with code (810) Sound system, the voice output is performed by the COMAND controller unit via the sound system amplifier control unit (N40/3) and the following speakers:

  Overview of system components, telematics   GF82.85-P-9999CE