Media interface control unit, component description - GF82.60-P-5000CEA
MODEL 204.0/2/3 with CODE (518) Media Interface as of model year 2013/YoM 12
MODEL 204.9 with CODE (518) Media Interface as of model year 2013/model refinement package 12
Shown on model 204.0
Location
The media interface control unit is located behind the glove compartment.
Illustrated on model 204.9
Task
- Receive signals
- Transmit signals
Receive signals
- Direct lines
- Media Oriented System Transport (MOST)
Direct lines
- Power supply via circuit 31 and circuit 30g
- Audio signals and data from media interface electrical connector (X18/70) via a prefabricated connecting cable
- Electronic wake-up for MOST
Media Oriented System Transport (MOST)
- Control and operating signals from the audio equipment
Transmit signals
- Direct lines
- MOST
Direct lines
- General power supply and power supply to Media Interface connector for Universal Serial Bus (USB)
- Control signals to media interface electrical connector via a prefabricated connecting cable
MOST
- Audio signals and data to the audio unit
| Technical data Designation |
Unit | Values | Tolerance range | Remarks |
|---|---|---|---|---|
| Media interface control unit | ||||
| Power supply | - | - | Operating voltage (UB ) | |
| Voltage limits | VV VV |
>9 < 16 |
Minimum (UBmin
) Maximum (UBmax ) |
|
| Power consumption | mA A Ah |
400 1.5 0.01 |
Average Maximum Quiescent current (standby) |
|
| Reverse polarity protection | Yes, in the range of -9 V to -16 V; polarity reversal up to -16 V for 1 min | |||
| Overvoltage protection | Up to 18 V for 60 min, up to 27 V for 1 min | |||
| Flash capability/coding capability | YES/n. A. | |||
| Adapter cable for USB devices | ||||
| Power consumption | A | 1 | Maximum |
| Wiring diagram for media interface control unit | N125/1 | PE82.60-P-2105-97FAA |