Manual interior lights control, function - GF82.20-P-2000CE
MODEL 204 as of model year 2009
Without code (414) Power glass tilting/sliding roof
With code (414) Electric glass tilting/sliding sunroof
Manual interior lights control in general
The manual interior lights control permits the interior illumination, reading illumination, vanity mirror illumination as well as the glove compartment illumination to be switched on and off by operating the relevant switch.
A distinction is made between the following variants:
- Component actuation via the non-networked overhead control panel electronics (without code (414) Power glass tilting/sliding roof)
- Component actuation via the networked overhead control panel control unit (with code (414) Power glass tilting/sliding roof)
The overhead control panel electronics is supplied with power through the front SAM control unit.
The overhead control panel control unit is a participant on the interior CAN. This reads in the status of the operated switch and transmits it to the front SAM control unit via the interior CAN. The front SAM control unit receives the relevant status and transmits the switch-on request via the interior CAN back to the overhead control panel control unit, which then actuates the requested lighting function.
The manual interior lights control function encompasses the following subfunctions:
- Function sequence for interior illumination
- Function sequence for reading illumination
- Function sequence for vanity mirror illumination
- Function sequence for glove compartment illumination
Function sequence for interior illumination
Without code (414) Power glass tilting/sliding roof:
The following interior illumination components can be switched on or off manually by operating the switches that are located on the housing of the overhead control panel electronics:
- Left front interior lamp and right front interior lamp via the front dome lamp switch
- Rear interior lamp via the rear dome lamp switch ()
For code (414) Power glass tilting/sliding roof:
The following interior illumination components can be switched on or off manually by operating the switches that are located on the housing of the overhead control panel control unit:
- Left front interior lamp and right front interior lamp via the front dome lamp switch
- Rear interior lamp via the rear dome lamp switch ()
Function sequence for reading illumination
The reading lamps illuminate a defined area in front of the user, without having a distracting dazzling effect. The following reading lamp components can be switched on or off manually by operating the switches:
- Left reading lamp via the left front reading lamp switch
- Right reading lamp via the right front reading lamp switch
- Left rear reading lamp via the left rear reading lamp switch (on model 204.0/2 with code (954) Avantgarde or code (955) Elegance or model 204.9 with code (876) Interior lights package)
- Right rear reading lamp via the right rear reading lamp switch (on model 204.0/2 with code (954) Avantgarde or code (955) Elegance or model 204.9 with code (876) Interior lights package)
Function sequence for vanity mirror illumination
The following vanity mirror illumination components can be switched on or off manually by opening or closing the relevant mirror cover:
- Left sun visor mirror lamp via the left front mirror lamp switch
- Right sun visor mirror lamp over the right front mirror lamp switch
The power supply to the mirror lamp switch is interrupted under the following conditions:
- Locking of the vehicle if all doors are closed
- Expiry of t = 30 min after circuit 15 OFF
Additional function requirements for glove compartment illumination
- Circuit 15R ON
The electronic ignition lock control unit sends the status of circuit 15 to the front SAM control unit via interior CAN.
Function sequence for glove compartment illumination
The glove compartment lamp switch is supplied with power via the front SAM control unit. The voltage is switched through to the glove compartment lamp when the glove compartment lid is opened.
| Electrical function schematic for manual interior lights control | PE82.20-P-2056-97FAA | ||
| Overview of interior illumination (IBL) system components | GF82.20-P-9997CE |