Stabilizer - BA32.35-P-1000-01E
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 169 with ENGINE 780
STABILIZER
| Number | Designation | MODEL 169 with ENGINE 780 | ||
|---|---|---|---|---|
| BA32.35-P-1001-01E | Nut, rear stabilizer bar to body | M10 | Nm | 30 |
| BA32.35-P-1002-01E | Nut, rear stabilizer bar to torsion bar linkage | M10 | Nm | 30 |
| BA32.35-P-1003-01E | Nut, torsion bar linkage to suspension strut | M10 | Nm | 60 |
| BA32.35-P-1004-01E | Nut, front stabilizer bar to torsion bar linkage | M10 | Nm | 60 |
| BA32.35-P-1005-01E | Bolt, front stabilizer bar to front axle carrier | M8 | Nm | 35 |
| BA32.35-P-1006-01E | Nut, torsion bar linkage to spring control arm | M8 | Nm | 20 |