Front axle torsion bar - BA32.20-P-1000-02L

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 164.1/8, 251

FRONT AXLE TORSION BAR

Number	Designation			Model 164.1/8	Model 251
BA32.20-P-1001-02L	Bolt, stabilizer bar retaining clamp to bearing bracket		Nm	180	180
BA32.20-P-1002-02L	Bolt, torsion bushing retaining clamp		Nm	40	40
BA32.20-P-1003-02L	Nut, torsion bar linkage to front suspension strut	Stage 1	Nm	100	100
		Stage 2: Loosen	∠°	180	180
		Stage 3	Nm	120	120
		Stage 4	∠°	45	45
BA32.20-P-1004-02L	Nut, torsion bar linkage to torsion bar	Stage 1	Nm	100	100
		Stage 2: Loosen	∠°	180	180
		Stage 3	Nm	120	120
		Stage 4	∠°	45	45
BA32.20-P-1005-02L	Bolt, bearing bracket to front axle carrier	Stage 1	Nm	50	50
		Stage 2: Loosen	∠°	90	90
		Stage 3	Nm	50	50