Front axle torsion bar - BA32.20-P-1000-02F
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 168, 414
FRONT AXLE STABILIZER BAR
| Number | Designation | MODEL 168 up to 8/25/02 | MODEL 168 as of 8/26/02 | |||
|---|---|---|---|---|---|---|
| BA32.20-P-1001-02F | Bolt, stabilizer bar to front axle carrier | Nm | 28 | 28 | ||
| BA32.20-P-1002-02F | Self-locking nut, connecting rod to torsion bar | Nm | 45 | 60 | ||
| BA32.20-P-1003-02F | Self-locking nut, torsion bar linkage to suspension strut | Nm | 45 | 60 | ||
| BA32.20-P-1004-02F | Self-locking nut, connecting rod to torsion bar | M10 | Stage 1 | Nm | - | - |
| Loosen stage 2 | Nm | - | - | |||
| Stage 3 | Nm | - | - | |||
| Stage 4 | ∠° | - | - | |||
| M12 | Nm | |||||
| BA32.20-P-1005-02F | Self-locking nut, connecting rod to spring strut | M10 | Stage 1 | Nm | - | - |
| Loosen stage 2 | Nm | - | - | |||
| Stage 3 | Nm | - | - | |||
| Stage 4 | ∠° | - | - | |||
| M12 | Nm | - | - | |||
FRONT AXLE STABILIZER BAR
| Number | Designation | MODEL 414 | |||
|---|---|---|---|---|---|
| BA32.20-P-1001-02F | Bolt, stabilizer bar to front axle carrier | Nm | 28 | ||
| BA32.20-P-1002-02F | Self-locking nut, connecting rod to torsion bar | Nm | - | ||
| BA32.20-P-1003-02F | Self-locking nut, torsion bar linkage to suspension strut | Nm | - | ||
| BA32.20-P-1004-02F | Self-locking nut, connecting rod to torsion bar | M10 | Stage 1 | Nm | 40 |
| Loosen stage 2 | Nm | - 40 | |||
| Stage 3 | Nm | 30 | |||
| Stage 4 | ∠° | 35 | |||
| M12 | Nm | 90 | |||
| BA32.20-P-1005-02F | Self-locking nut, connecting rod to spring strut | M10 | Stage 1 | Nm | 40 |
| Loosen stage 2 | Nm | - 40 | |||
| Stage 3 | Nm | 30 | |||
| Stage 4 | ∠° | 35 | |||
| M12 | Nm | 90 | |||