LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> GLK250 >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Suspension - Torque Specifications) >> Torque Specifications >> Active roll stabilization - BA32.34-P-1000-01A

Active roll stabilization - BA32.34-P-1000-01A

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 166 

ACTIVE ROLL STABILIZATION

Number Designation MODEL 166
BA32.34-P-1001-01A Screw/bolt, bracket to front axle valve block   Nm 8
BA32.34-P-1002-01A Screw/bolt, valve support to front axle   Nm 20
BA32.34-P-1003-01A Screw/bolt, mounting plate to front axle valve support   Nm 20
BA32.34-P-1004-01A Screw/bolt, bracket to rear axle valve block   Nm 8
BA32.34-P-1005-01A Screw/bolt, bracket to rear axle valve support   Nm 8
BA32.34-P-1006-01A Screw/bolt, valve support to rear axle   Nm 20
BA32.34-P-1007-01A Screw/bolt, oil line to rotary actuator on front axle/rear axle   Nm 20
BA32.34-P-1008-01A Screw/bolt, oil line to valve block on front axle/rear axle   Nm 20
BA32.34-P-1009-01A Screw/bolt, oil line to coolant pump   Nm 14
BA32.34-P-1010-01A Screw/bolt, oil line to rear axle carrier   Nm 20
BA32.34-P-1011-01A Screw/bolt, oil line to oil line M8 Nm 20