Active Body Control suspension - BA32.50-P-1000-01A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 215, 220, 230 with CODE 487 (Active Body Control (ABC))
ACTIVE BODY CONTROL SUSPENSION
| Number | Designation | MODEL 215 | MODEL 220 | ||
|---|---|---|---|---|---|
| BA32.50-P-1001-01A | Union nut, line to pressure reservoir | Nm | 50 | 50 | |
| BA32.50-P-1002-01A | Union nut, line to front/rear axle valve body | Nm | 40 | 40 | |
| BA32.50-P-1003-01A | Union nut, line to distributor | Nm | 50 | 50 | |
| BA32.50-P-1004-01A | Nut, front axle pressure reservoir to retaining plate | Nm | 8 | 8 | |
| BA32.50-P-1005-01A | Nut, rear axle pressure reservoir to spare tire well | Nm | 20 | 20 | |
| BA32.50-P-1006-01A | Bolt, valve body to retaining plate | Nm | 10 | 10 | |
| BA32.50-P-1007-01A | Bolt, return pressure reservoir to bracket | Nm | 10 | 10 | |
| BA32.50-P-1008-01A | Nut, return pressure reservoir to bracket | Nm | 8 | 8 | |
| BA32.50-P-1009-01A | Nut, bracket for rear axle valve body and return pressure reservoir to body | Nm | 10 | 10 | |
| BA32.50-P-1010-01A | Nut, front axle valve body to rubber buffer | Nm | 10 | 10 | |
| BA32.50-P-1011-01A | Bolt, bracket for pressure supply valve unit to front axle carrier | Nm | 20 | 20 | |
| BA32.50-P-1012-01A | Union nut, line to pressure supply valve unit | M14 | Nm | 50 | 50 |
| M16 | Nm | 50 | 50 | ||
| BA32.50-P-1013-01A | Pulsation damper to pressure supply valve unit | Nm | 50 | 50 | |
| BA32.50-P-1014-01A | Bolt, pressure supply valve unit to bracket | Nm | 10 | 10 | |
| BA32.50-P-1015-01A | Nut, rear axle pressure reservoir to carrier plate | Nm | - | - | |
| BA32.50-P-1016-01A | Nut, carrier plate to rubber buffer | Nm | - | - | |
| BA32.50-P-1017-01A | Banjo bolt on pressure supply valve unit | Nm | 40 | 40 | |
| BA32.50-P-1018-01A | Bolt of oil cooler to bracket | Nm | 6 | 6 | |
| BA32.50-P-1019-01A | Bolt, shield of pressure supply valve unit to front axle carrier | Nm | - | 20 | |
| BA32.50-P-1020-01A | Pressure sensor to valve unit for pressure supply | Nm | 50 | 50 | |
| BA32.50-P-1021-01A | Bolt connecting line to front axle valve unit | M8X25 | Nm | - | - |
| BA32.50-P-1022-01A | Bolt, line to rear axle valve unit | M8X25 | Nm | - | - |
| BA32.50-P-1023-01A | Nut of front axle valve unit to bracket | Nm | - | - | |
| BA32.50-P-1024-01A | Nut, valve unit bracket to front end | Nm | - | - | |
| BA32.50-P-1025-01A | Nut, rear axle pressure reservoir to valve unit bracket | Nm | - | - | |
| BA32.50-P-1026-01A | Front axle pressure reservoir to valve unit | Nm | - | - | |
| BA32.50-P-1027-01A | Bolt, line to rear axle pressure reservoir | Nm | - | - | |
| BA32.50-P-1028-01A | Nut of rear axle level sensor to spring control arm | Nm | - | - | |
| BA32.50-P-1029-01A | Pressure sensor on valve unit | Nm | - | - | |
| BA32.50-P-1030-01A | Pulsation damper to tandem pump | Nm | - | - | |
ACTIVE BODY CONTROL SUSPENSION
| Number | Designation | MODEL 230 | ||
|---|---|---|---|---|
| BA32.50-P-1001-01A | Union nut, line to pressure reservoir | Nm | 45 | |
| BA32.50-P-1002-01A | Union nut, line to front/rear axle valve body | Nm | 45 | |
| BA32.50-P-1003-01A | Union nut, line to distributor | Nm | 45 | |
| BA32.50-P-1004-01A | Nut, front axle pressure reservoir to retaining plate | Nm | 9 | |
| BA32.50-P-1005-01A | Nut, rear axle pressure reservoir to spare tire well | Nm | - | |
| BA32.50-P-1006-01A | Bolt, valve body to retaining plate | Nm | 9 | |
| BA32.50-P-1007-01A | Bolt, return pressure reservoir to bracket | Nm | 9 | |
| BA32.50-P-1008-01A | Nut, return pressure reservoir to bracket | Nm | 9 | |
| BA32.50-P-1009-01A | Nut, bracket for rear axle valve body and return pressure reservoir to body | Nm | - | |
| BA32.50-P-1010-01A | Nut, front axle valve body to rubber buffer | Nm | 9 | |
| BA32.50-P-1011-01A | Bolt, bracket for pressure supply valve unit to front axle carrier | Nm | - | |
| BA32.50-P-1012-01A | Union nut, line to pressure supply valve unit | M14 | Nm | 45 |
| M16 | Nm | 45 | ||
| BA32.50-P-1013-01A | Pulsation damper to pressure supply valve unit | Nm | 50 | |
| BA32.50-P-1014-01A | Bolt, pressure supply valve unit to bracket | Nm | 9 | |
| BA32.50-P-1015-01A | Nut, rear axle pressure reservoir to carrier plate | Nm | 9 | |
| BA32.50-P-1016-01A | Nut, carrier plate to rubber buffer | Nm | 9 | |
| BA32.50-P-1017-01A | Banjo bolt on pressure supply valve unit | Nm | 9 | |
| BA32.50-P-1018-01A | Bolt of oil cooler to bracket | Nm | 6 | |
| BA32.50-P-1019-01A | Bolt, shield of pressure supply valve unit to front axle carrier | Nm | - | |
| BA32.50-P-1020-01A | Pressure sensor to valve unit for pressure supply | Nm | 50 | |
| BA32.50-P-1021-01A | Bolt connecting line to front axle valve unit | M8X25 | Nm | 20 |
| BA32.50-P-1022-01A | Bolt, line to rear axle valve unit | M8X25 | Nm | 20 |
| BA32.50-P-1023-01A | Nut of front axle valve unit to bracket | Nm | 10 | |
| BA32.50-P-1024-01A | Nut, valve unit bracket to front end | Nm | 10 | |
| BA32.50-P-1025-01A | Nut, rear axle pressure reservoir to valve unit bracket | Nm | 10 | |
| BA32.50-P-1026-01A | Front axle pressure reservoir to valve unit | Nm | 80 | |
| BA32.50-P-1027-01A | Bolt, line to rear axle pressure reservoir | Nm | 20 | |
| BA32.50-P-1028-01A | Nut of rear axle level sensor to spring control arm | Nm | 20 | |
| BA32.50-P-1029-01A | Pressure sensor on valve unit | Nm | 35 | |
| BA32.50-P-1030-01A | Pulsation damper to tandem pump | Nm | 45 | |