Remove/Install Tailgate Wiper Arm - AR82.30-P-6910GZ

MODEL 164, 166 

Shown on model 164.1 

Fig 1: Identifying Tailgate Wiper Arm Remove/Install Components - Shown On Model 164.1

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Open the cover (1)
2	Unscrew nut for wiper arm (2)	Nut for rear window wiper arm to wiper motor	*BA82.30-P-1004-01J
3	Remove wiper arm in parking position (3)	Fold wiper arm back and remove, use puller if necessary.
		Puller	Figure
4	Install in the reverse order	Mount wiper arm such that the wiper arm points to the right.

WINDSHIELD WIPER

Number	Designation		MODEL 164.1/8	MODEL 166
BA82.30-P-1004-01J	Nut for rear window wiper arm to wiper motor	Nm	12	12

Fig 2: Identifying Puller (001 589 38 33 00)

Courtesy of MERCEDES-BENZ USA