Remove/Install 360° Front Camera - AR54.30-P-3001GQ

MODEL 166 with CODE 501 (360 degree camera) 

Fig 1: Identifying 360° Front Camera Remove/Install Components - Shown On Model 166.873

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Switch off ignition
2.1	Remove radiator grille	MODEL 166.0
			AR88.40-P-4001GQ
2.2	Remove Mercedes star (1)	MODEL 166.8
			AR88.40-P-4050NKB
3	Unfasten locks (2) and remove 360° camera front (B84/9) rearwards rear out of radiator trim	Handle the 360° camera front (B84/9) carefully. The lens will otherwise be damaged.
4	Release and disconnect electrical connector (3)
5	Install in the reverse order
6	Calibrate 360° camera front (B84/9) using STAR DIAGNOSIS
			AD00.00-P-2000-04A