Remove/install hydraulic pump pulsation damper - AR32.34-P-0013GQ
MODEL 166 with ENGINE 276, 642 with CODE 468 (ACTIVE CURVE SYSTEM)
| Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | AS00.00-Z-0013-01A | |
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notes on active roll stabilization | AH32.34-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove hydraulic pump | AR32.34-P-0030GQ | |
| Clean | |||
| 2 | Clean the area around the pulsation damper (1) | Assembly cleaner | *BR00.45-Z-1028-04A |
| 3 | Unscrew pulsation damper (1) from hydraulic pump (2) | ||
| *BA32.00-P-1005-01A | |||
| 4 | Install in the reverse order |
HYDRAULIC PUMP
| Number | Designation | MODEL 166 with ENGINE 276 | MODEL 166 with ENGINE 642 | |
|---|---|---|---|---|
| BA32.00-P-1005-01A | Pulsation damper to hydraulic pump | Nm | 45 | - |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | - |