Rear axle torsion bar - BA32.20-P-1000-04O
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 190
MODEL 197
REAR AXLE TORSION BAR
| Number | Designation | MODEL 190 | MODEL 197 | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04O | Nut, torsion bar linkage to torsion bar | Nm | 60 | 60 | |
| BA32.20-P-1002-04O | Nut, stabilizer bar linkage to transverse control arm | Nm | - | 60 | |
| BA32.20-P-1003-04O | Bolt, torsion bar to body | Stage 1 | Nm | 20 | 20 |
| Stage 2 | Nm | 35 | 35 | ||
| BA32.20-P-1004-04O | Bolt, lever arm to stabilizer bar | Nm | 42 | 42 | |
| BA32.20-P-1005-04O | Nut, torsion bar linkage to wheel carrier | Nm | 60 | - | |