Remove/install engine mount or engine crossmember at the rear - AR22.10-P-1180GQ
MODEL 166 with ENGINE 157
MODEL 166 with ENGINE 276
MODEL 166 with ENGINE 278
MODEL 166 with ENGINE 642
MODEL 166 with ENGINE 651
MODIFICATION NOTES
| 15.12.14 | Screw engine mount at the rear of transmission | Model 166 Model Engine 157 | *BA22.10-P-1003-03G |
Shown: engine crossmember made out of aluminum
| Remove/install | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Notes on Bolted connections with self tapping Screws | AH00.00-P-0007-01SF | ||
| Notes on self-locking nuts and Bolts | AH00.00-N-0001-01A | ||
| 1 | Secure vehicle on vehicle lift | AR00.60-P-0100GZ | |
| 2 | Remove respective section of the underfloor paneling | AR61.30-P-1001GQ | |
| 3 | Remove Screw/ Bolts (2) and remove diagonal strut (2) | MODEL 166 with ENGINE 157, 278 MODEL 166 with ENGINE 276, 642, 651 |
*BA22.10-P-1007-03G |
MODEL 166 with ENGINE 157, 278 MODEL 166 with ENGINE 276, 642, 651 |
*BA22.10-P-1009-03G | ||
| 4 | Remove Screw/ Bolts (3s) and cross strut (3) | MODEL 166 with ENGINE 157, 278 MODEL 166 with ENGINE 276, 642, 651 |
*BA22.10-P-1006-03G |
MODEL 166 with ENGINE 157, 278 MODEL 166 with ENGINE 276, 642, 651 |
*BA22.10-P-1008-03G | ||
| 5 | Detach nuts (4s) on rear engine mount (5) | MODEL 166 with ENGINE 157, 278 MODEL 166 with ENGINE 276, 642, 651 |
*BA22.10-P-1004-03G |
| 6 | Support transmission with transmission jack and transmission plate | Transmission jack gotis://H_00.10_01.
0 Transmission platform gotis://A_25/35/49_02. 0 |
|
| 7 | Remove Screw/ Bolts (1) and remove rear engine crossmember (1) | MODEL 166 with ENGINE 157, 278 MODEL 166 with ENGINE 276, 642, 651 |
*BA22.10-P-1005-03G |
| 8 | Remove Screw/ Bolts (5s) on rear engine mount (5) and remove engine mount (5) | MODEL 166 with ENGINE 157, 278 MODEL 166 with ENGINE 276, 642, 651 |
*BA22.10-P-1003-03G |
| 9 | Install in the reverse order |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 276, 642, 651 | MODEL 166 with ENGINE 157 | ||
|---|---|---|---|---|---|
| *BA22.10-P-1003-03G | Bolt, rear engine mount to transmission | Stage 1 | Nm | 20 | 10 |
| Stage 2 | Nm | - | 20 | ||
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 278 | ||
|---|---|---|---|---|
| *BA22.10-P-1003-03G | Bolt, rear engine mount to transmission | Stage 1 | Nm | 20 |
| Stage 2 | Nm | - | ||
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 276, 642, 651 | MODEL 166 with ENGINE 157 | |
|---|---|---|---|---|
| *BA22.10-P-1004-03G | Bolt/nut, connecting rear engine mount to rear engine cross member | Nm | 58 | 58 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 278 | |
|---|---|---|---|
| *BA22.10-P-1004-03G | Bolt/nut, connecting rear engine mount to rear engine cross member | Nm | 58 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 276, 642, 651 | MODEL 166 with ENGINE 157 | |
|---|---|---|---|---|
| *BA22.10-P-1005-03G | Bolt, rear engine cross member to body | Nm | 55 | 55 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 278 | |
|---|---|---|---|
| *BA22.10-P-1005-03G | Bolt, rear engine cross member to body | Nm | 55 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 276, 642, 651 | MODEL 166 with ENGINE 157 | |
|---|---|---|---|---|
| *BA22.10-P-1006-03G | Bolt, cross strut to engine cross member | Nm | 55 | 55 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 278 | |
|---|---|---|---|
| *BA22.10-P-1006-03G | Bolt, cross strut to engine cross member | Nm | 55 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 276, 642, 651 | MODEL 166 with ENGINE 157 | |
|---|---|---|---|---|
| *BA22.10-P-1007-03G | Bolt, diagonal strut to engine cross member | Nm | 45 | 45 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 278 | |
|---|---|---|---|
| *BA22.10-P-1007-03G | Bolt, diagonal strut to engine cross member | Nm | 45 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 276, 642, 651 | MODEL 166 with ENGINE 157 | |
|---|---|---|---|---|
| *BA22.10-P-1008-03G | Bolt, cross strut to body | Nm | 45 | 45 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 278 | |
|---|---|---|---|
| *BA22.10-P-1008-03G | Bolt, cross strut to body | Nm | 45 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 276, 642, 651 | MODEL 166 with ENGINE 157 | |
|---|---|---|---|---|
| *BA22.10-P-1009-03G | Bolt, diagonal strut to body | Nm | 45 | 45 |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 166 with ENGINE 278 | |
|---|---|---|---|
| *BA22.10-P-1009-03G | Bolt, diagonal strut to body | Nm | 45 |