Remove/install front floor covering (left) - AR68.20-P-2050GQ

MODEL 166 

Fig 1: Identifying Front Floor Covering (Left) Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove left front seat		AR91.10-P-1000GQ
2	Remove left front door sill (4)		AR68.30-P-4100GQ
3	Remove accelerator pedal (3)		AR30.12-P-1321GZ
4	Slightly lift floor covering (1) at entrance
5	Pull floor covering (1) out below center console (2)
6	Remove floor covering (1)	Ensure that floor covering (1) is routed correctly.
7	Install in the reverse order