Remove/install front spring - AR32.20-P-0200GW

MODEL 463 as of model year 2013/facelift 2012 

Illustrated on right side of vehicle 

Fig 1: Front Spring Remove/Install Components - Illustrated On Right Side Of Vehicle

Courtesy of MERCEDES-BENZ USA

Fig 2: Front Spring Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Risk of poisoning  caused by swallowing brake fluid. Risk of injury  caused by brake fluid coming into contact with skin and eyes.	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Brake fluid notes		AH42.50-P-0001-01A
1	Lift/jack up vehicle		AR00.60-P-1000G
2	Remove front wheels
3	Support front axle
4	Unscrew brake hose (1).	The brake fluid reservoir must not run empty, otherwise difficulties may be encountered when bleeding. Dripping brake fluid causes paint damage. Seal connections immediately with stop plugs.
			*BA42.10-P-1001-04B
			Fig 3
5	Unscrew hydraulic line for differential lock shift cylinder	Seal connections immediately with stop plugs.
			Fig 3
6	Detach electrical lines (2) at brackets.
7	Unscrew nut (5) at shock absorber (4).		*BA32.25-P-1001-01D
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
8	Lower front axle	Only lower the front axle until the front spring (3) can be removed.
9	Remove front spring (3)	Check plastic hose (6) for damage at first and last coil of front spring (3), replace if necessary. Ensure front spring (3) is seated correctly.
10	Install in the reverse order
11	Bleed brake system and check for proper function		AR42.10-P-0010GW
12	Bleed hydraulic system for differential lock		AR33.40-P-0701GW

Fig 3: Identifying Set Of Stop Plugs (129 589 00 91 00)

Courtesy of MERCEDES-BENZ USA