Remove/install pressure transducer for boost pressure control - AR07.17-P-7002GW
ENGINES 157 in MODEL 463
| Remove/install | |||
| Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | ||
| 1 | Open engine hood | AR88.40-P-1000GG | |
| 2 | Remove center section of the upper engine cover | ||
| 3 | Detach vacuum lines (2) to pressure transducer (Y77/1) | ||
| 4 | Remove screw/bolts (4) and pressure transducer (Y77/1) from bracket (1) | *BA09.41-P-1009-01O | |
| 5 | Release and disconnect electrical connector (3) on heating element (Y77/1) | ||
| 6 | Install in the reverse order | ||
| 7 | Read out fault memory with STAR DIAGNOSIS and erase if necessary | AD00.00-P-2000-04A |
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 157 | |
|---|---|---|---|
| BA09.41-P-1009-01O | Screw/bolt, pressure transducer to bracket | Nm | 7 |