Remove/install rear engine mount - AR22.10-P-1160GW

Engine 157, 176, 279 in MODEL 463 

Fig 1: Rear Engine Mount Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Notes on bolted connections with self tapping screws		AH00.00-P-0007-01SF
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Remove/install
1	Lift/jack up vehicle		AR00.60-P-1000G
2	Prop up transmission and secure against falling down
	000 588 10 62 00 Support plate		WS26.00-P-3309B
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
3	Remove screw/bolt (1)	Engine 176, 279 in model 463Screw/bolt, rear engine mount to engine mount carrier	*BA22.10-P-1006-01X
		Engine 157 in model 463Bolt, mounting console for rear frame member to rear engine mount	*BA22.10-P-1002-01K
4	Remove screw/bolts (2)	Engine 176, 279 in model 463Screw/bolt, rear engine mount to bracket (transmission)	*BA22.10-P-1007-01X
		Engine 157 in model 463Rear engine mount to bracket	*BA22.10-P-1006-01K
5	Take out rear engine mount (3)
6	Install in the reverse order

ENGINE MOUNTS, ENGINE SUPPORTS

Number	Designation		Engine 157
BA22.10-P-1002-01K	Bolt, mounting console for rear frame member to rear engine mount	Nm	28

ENGINE MOUNTS, ENGINE SUPPORTS

Number	Designation			Engine 157
BA22.10-P-1006-01K	Rear engine mount to bracket	Stage 1	Nm	50
		Stage 2	∠°	-

ENGINE MOUNTS, ENGINE SUPPORTS

Number	Designation			Engine 176, 279 in model 463
BA22.10-P-1006-01X	Screw/bolt, rear engine mount to engine mount carrier	M8	Nm	28

ENGINE MOUNTS, ENGINE SUPPORTS

Number	Designation			Engine 176, 279 in model 463
BA22.10-P-1007-01X	Screw/bolt, rear engine mount to bracket (transmission)	M10	Nm	50