Remove/install catalytic converter - AR49.10-P-5500GW
ENGINE 157, 279 in MODEL 463 as of model year 2013
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Remove/install | |||
| 1 | Lift/jack up vehicle | AR00.60-P-1000G | |
| 2 | Unclip electrical connection (en) at oxygen sensor(s) (G3/3, G3/4, G3/5, G3/6) from the lower and side brackets on transmission and separate | ||
| 3 | Secure rear muffler (4) against falling down. | ||
| 4 | Remove screw/bolt (1) | *BA49.10-P-1031-01A | |
| 5 | Remove screw/bolt (3) | *BA49.10-P-1029-01A | |
| 6 | Remove screw/bolts (2) | *BA49.10-P-1030-01A | |
| 7 | Remove catalytic converter (5) downwards | ||
| 8 | Install in the reverse order | ||
| Check | |||
| 9 | Check installation position and unobstructed movement of exhaust system | ||
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 10 | Carry out an engine test run and check exhaust system for leaktightness |
EXHAUST SYSTEM
| Number | Designation | Engine 157, 279 in model 463 | |
|---|---|---|---|
| BA49.10-P-1029-01A | Bolt, catalytic converter to exhaust line | Nm | 25 |
EXHAUST SYSTEM
| Number | Designation | Engine 157, 279 in model 463 | |
|---|---|---|---|
| BA49.10-P-1030-01A | Bolt, catalytic converter to bracket (elastomer bearing) | Nm | 20 |
EXHAUST SYSTEM
| Number | Designation | Engine 157, 279 in model 463 | |
|---|---|---|---|
| BA49.10-P-1031-01A | Bolt, catalytic converter to muffler | Nm | 25 |