Remove/install parking brake lever with bearing bracket - AR42.20-P-0502GW
MODEL 463 as of model year 2013/facelift 2012
| Remove/install | |||
| 1 | Remove center console | AR68.20-P-2000GW | |
| 2 | Detach electrical connection from parking brake (X20/10) | ||
| 3 | Unscrew both adjusting nuts (2) | ||
| 4 | Unscrew nuts (5) | *BA42.20-P-1003-01B | |
| 5 | Remove parking brake lever (1) with mounting console (3) | ||
| 6 | Install in the reverse order | ||
| 7 | Adjust parking brake on roller dynamometer | AR42.20-P-0550GW |
PARKING BRAKE
| Number | Designation | Model 463 as of 1.12.00 | |
|---|---|---|---|
| BA42.20-P-1003-01B | Nut, handbrake lever bearing bracket to center tunnel | Nm | 8 |