Remove/install sliding/pop-up roof motor - AR77.20-P-3010A
MODEL 463 (except 463.244/245/247/248/249/322/323/332/333) with CODE (D27) Power sliding/pop-up roof
| Remove/install | |||
| 1 | Remove lining on sliding/pop-up roof | AR77.20-P-0500G | |
| 2 | Remove control cable for sliding/pop-up roof | AR77.20-P-1400A | |
| 3 | Remove edge guard (1) from left rear door pillar | ||
| 4 | Remove paneling (2) from left rear door pillar | ||
| 5 | Remove guide tube (3) from gear (arrow) | ||
| 6 | Disconnect electrical connector (4) | ||
| 7 | Remove motor with carrier plate | ||
| 8 | Install in the reverse order | ||
| 9 | Carry out operational check |