Remove/install xenon headlamp control unit - AR82.10-P-4632GW
MODEL 463 as of model year 2013/model refinement package 2012
Shown at right front
| Remove/install | |||
| Risk of death caused by high voltage at xenon headlamps. Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components at xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by toxic salts and mercury compounds being ingested or coming into contact with skin | Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure sufficient ventilation in the working area. | AS82.10-Z-0001-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Buffer basic data for left xenon light control unit (E1n1) or right xenon light control unit (E2n1) in STAR DIAGNOSIS | When replacing left xenon light control unit (E1n1) or right xenon light control unit (E2n1) |
AD00.00-P-2000-04A |
| 2 | Remove left front lamp unit (E1) and right front lamp unit (E2) | AR82.10-P-4730GW | |
| 3 | Remove bolts (1) | ||
| 4 | Remove left xenon light control unit (E1n1) from left front left unit (E1) or right xenon light control unit (E2n1) from right front lamp unit (E2) | Fig 2 | |
| 5 | Install in the reverse order | ||
| 6 | Check adjustment of left low beam or right low beam, correct if necessary | When replacing left xenon light control unit (E1n1) or right xenon light control unit (E2n1) |