Remove/install rear blower motor - AR83.30-P-5565EW

MODEL 204.0/2, 212, 218 with CODE 581 (Automatic air conditioning) 

Fig 1: Identifying Rear Blower Motor Remove/Install Components

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 212 with CODE 279 (Electronic gear selector) 

	Notes on avoiding damage to optical fibers during repair work		AH82.60-P-0001-05AK
	Remove/install
1	Remove center console (1)	MODEL 204.0/2 with CODE 581 (Automatic air conditioning)	AR68.20-P-2000CW
		MODEL 212 with CODE 581 (Automatic air conditioning)	AR68.20-P-2000EW
		MODEL 218 with CODE 581 (Automatic air conditioning)	AR68.20-P-2000EL
2	Disconnect rear blower motor electrical connector (M2/1x1)
3	Release catch hook (arrow A) and remove plug (4) of rear blower motor electrical connector (M2/1x1) from bracket at center console (1)
4	Disconnect Audio/COMAND control panel electrical connector (A40/9x1)	MODEL 204.0/2, 212 with CODE 581 (Automatic air conditioning)
5	Remove white plug of Audio/COMAND control panel electrical connector (A40/9x1) from plug (4) of rear blower motor electrical connector (M2/1x1)	MODEL 204.0/2, 212 with CODE 581 (Automatic air conditioning)
6	Free wiring harnesses (2) from lugs (3, 8)	There are 5 lugs (8) each to the right and left at the rear blower motor (M2/1).
7	Loosen retaining clamp (6)
8	Remove screws/bolts (5) and remove rear blower motor (M2/1)
9	Install in the reverse order