Read out map data status from COMAND navigation system - AP82.85-P-8251B
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 164, 166, 172, 176, 197, 204, 207, 212, 216, 218, 221, 230, 231, 242, 246, 251, 463
| Read out navigation system | |||
| 1 | Switch on COMAND | ||
| 2 | In the main function bar with COMAND controller, select "Navi" and confirm | ||
| 3 | Select "Map version" with COMAND controller and confirm; "Map version" is displayed | Depending on the COMAND software release, the menu item "Map version" may not be available. In this case: ↓
|
|
| Check | |||
| 4 | Note the map version displayed on service sheet and compare with the map version currently available | With map data release that is not up to date: ↓ Check whether a map data update is available to the customer free of charge. Initial registration was max. 3 years ago. If so: ↓ Subject to a separate repair order, update the map data free of charge. * Map update ↓ |
|
| Service Information: Free map updates for COMAND MODEL 117, 164, 166, 172, 176, 197, 204, 207, 212, 216, 218, 221, 231, 242, 246, 251, 463Up to 3 years as of initial registration date If no: ↓ Check with the customer whether map data should be updated subject to a charge. If so: ↓ Subject to separate repair order, update the map data. |
SI82.85-P-0019A | ||
| AP82.85-P-8252A |