Retrofit Garmin(R) MAP PILOT - AN82.85-P-0011ELX

MODEL 218.3/9 with CODE 505 (Radio 20 NTG5, not navigation-enabled) without CODE 460 (Canada version) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 830 (Vehicles for China, additional parts) 

MODEL 218.3/9 with CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT) without CODE 460 (Canada version) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 830 (Vehicles for China, additional parts) 

Fig 1: Identifying Instrument Cluster And Radio

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove instrument cluster
			AR54.30-P-6015EL
2.1	Radio (A2)	With CODE 505 (Audio 20 CD)
			AR82.60-P-7502EW
		Audio 20 CD radio (A2) is no longer required and must be replaced with a navigation-capable radio.
2.2	Radio (A2)	With CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
			AR82.60-P-7502EW
	Install
3	Install GPS antenna
		With CODE 505 (Audio 20 CD) or with CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)	AZ82.61-P-0003-02ELX
4	Install radio (A2) (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
			AR82.60-P-7502EW
5	Install instrument cluster
			AR54.30-P-6015EL
	Update Vehicle Documentation (VeDoc)
6	Attach note "Garmin® MAP PILOT retrofitted as per AN82.85-P-0011ELX " under field organization texts to design group 82
7	Delete special equipment in online vehicle data card via Vehicle Documentation System (VeDoc): - CODE 505 (Audio 20 CD)	With CODE 505 (Audio 20 CD)
8	Enter special equipment in online vehicle data card via Vehicle Documentation System (VeDoc): - CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)	With CODE 505 (Audio 20 CD)
9	Enter special equipment in online vehicle data card via Vehicle Documentation System (VeDoc): - Code 357 (Garmin® MAP PILOT)
10	Connect diagnostic system and select vehicle via the vehicle identification number (VIN)
			AD00.00-P-2000-04A
11	Perform variant coding with XENTRY using the Software Calibration Number (SCN) on "Audio 20 CD including preinstallation for Garmin® MAP PILOT"	With CODE 505 (Audio 20 CD)
12	Perform variant coding with XENTRY using Software Calibration Number (SCN) on "Garmin® MAP PILOT"
13	Disconnect diagnostic system
			AD00.00-P-2000-04A
	Check
14	Perform function test	See operator's manual for Garmin® MAP PILOT navigation module.