Retrofit Speed Limit Assist - AN54.30-P-0100EC

MODEL 207 as of 1/1/11, 212 as of 1/1/11, 218 as of 1/1/11 with CODE 238 (Active lane keeping Assist) with CODE 512 (COMAND APS with DVD changer) 

MODEL 207 as of 1/1/11, 212 as of 1/1/11, 218 as of 1/1/11 with CODE 238 (Active lane keeping Assist) with CODE 527 (COMAND APS with single DVD drive (with navigation)) 

MODEL 207 as of 1/1/11, 212 as of 1/1/11, 218 as of 1/1/11 with CODE 476 (Lane keeping assist) with CODE 512 (COMAND APS with DVD changer) 

MODEL 207 as of 1/1/11, 212 as of 1/1/11, 218 as of 1/1/11 with CODE 476 (Lane keeping assist) with CODE 527 (COMAND APS with single DVD drive (with navigation)) 

	Initial startup
1	Order retrofitting via parts ordering process, specifying vehicle identification number (FIN)	Further information in Aftersales portal under: Info Center PIT Aftersales Parts Genuine parts Cars
	Update Vehicle Documentation (VeDoc)
2	Check if CODE 513 (Traffic Sign Assist) is entered on the on-line vehicle data card
3	Attach note "Speed Limit Assist retrofitted as per AN54.30-P-0100EC " in Vehicle Documentation (VeDoc) under field organization texts to design group 54
4	Connect diagnostic system and select vehicle using FIN
			AD00.00-P-2000-04A
5	Carry out variant coding using software calibration number (SCN)	"Central gateway (CGW)" "Chassis gateway (FWGW)" "Multifunction camera (MFK)" "Front signal acquisition and actuation module (SAM FRONT)" "Instrument cluster (IC)" "COMAND"
6	Disconnect diagnostic system
			AD00.00-P-2000-04A
7	Perform function test	See Owner's Manual.