Insertion/extraction of the rubber bushing on the track control arm - AR33.15-P-0170-02SX

Fig 1: Identifying Press Out/In Tool (220 589 06 43 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Set Of Thrust Pieces (221 589 01 34 00)

Courtesy of MERCEDES-BENZ USA

Press out

Press out rubber mount (17d) using thrust pieces (010, 012).
The press out/in tool 220 589 06 43 00 contains:
- thrust piece (012), part number 220 589 06 43 02.
The thrust piece set 221 589 01 34 00 contains:
- thrust piece (010), part number 221 589 01 43 01.
  
  Fig 3: Pressing Out Rubber Mount
  Courtesy of MERCEDES-BENZ USA
Pressing in
Press in rubber mount (17d) using thrust pieces (011, 012) far enough until the collar of the thrust piece (011) abuts with the spring control arm (17).
The press out/in tool 220 589 06 43 00 contains:
- thrust piece (012), part number 220 589 06 43 02.
The thrust piece set 221 589 01 34 00 contains:
- thrust piece (011), part number 221 589 01 43 02.
  
  Fig 4: Pressing In Rubber Mount
  Courtesy of MERCEDES-BENZ USA