LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> CL65 >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Climate Control -- Testing & Repair -- E350 (211.256)) >> Testing & Repair >> Remove/install water collector - AR83.25-P-1402T

Remove/install water collector - AR83.25-P-1402T

WARNING: This page is about a different car, the 2009 Mercedes-Benz E350 and 2008 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 211.0/2/6 

Fig 1: Identifying Water Collector Remove/Install Components
G07286031Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
REMOVINGINSTALLING Remove/Install     
1 Remove wiper arms   AR82.30-P-6100T
2.1 Remove multifunction sensor and place to one side with attached cable On vehicles with code (581b) convenience automatic air conditioning AR83.40-P-6730T 
3 Remove rubber seal (2) in water collector area (1)    
4 Detach gaskets (3) at the wiper shafts    
5 Unclip line (4) for windshield washer nozzles    
6 Remove expander clips (5) on water collector (1)    
7 Unclip water collector (1) in the area of the windshield (arrows) IMPORTANTInstallation:  Replace defective clips (6).  
8 Detach water drain hose (7) on water collector (1)    
9 Remove water collector (1)    
10 Install in the reverse order