000 589 30 33 00 Internal extractor - WS28.00-P-0001C
WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.
GROUP 28/Set C
MODELS 124.2/3, 203.08/09/28/29, 211.08/09/28/29, 220.08/18
MODELS 903.0/4, 904.0/4 with CODE (ZG1) Engageable all-wheel drive
MODELS 903.0/4, 904.0/4 with CODE (ZG2) Permanent all-wheel drive
MODELS 903.0/4, 904.0/4 with CODE (ZG3) Gear reduction for all-wheel drive
| Further use | FG 00 | WS00.00-N-3028Z |
| FG 33/Set C | WS33.00-N-3067C | |
| FG 26/Set C | WS26.00-P-0113C |
Use:
Model 124.3/4:
Internal extractor, 46-56 mm ø for bearing outer races, intermediate gear and drive shaft to counter stay 000 589 34 33 00
Model 903.0/4, 904.0/4 with code ZG1/ZG2/ZG3:
Remove bearing outer race from drive shaft/intermediate shaft at the rear axle end. Countersupport 000 589 34 33 00
Model 203, 211, 220 4MATIC:
Internal extractor for extracting bearing shells from the transmission housing, in combination with counter stay 000 589 34 33 00.