Remove/install cover for filler fitting - AR63.50-P-1400-01TA

WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tool For Replacing Right Rear Fender (211 589 00 91 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Cover Panel (211 589 02 91 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Locating Fuel Lines & Covers

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Remove inner fender at rear inner wheel arch panel.
Remove expansion tank and fuel filler neck from tank system.
Plug open fuel lines with plastic plugs (arrows).
Fasten cover on inner rear wheelhouse (areas A and B).
Use original nuts (area A).
Install protective cover (area C).