Wiring diagram for backup camera control unit - PE54.65-P-2102-97CAB
MODEL 216.3 with CODE (218) Backup camera control unit N66/10
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 15L |
| A40/3 | COMAND control unit | 11L |
| B84/3 | Backup camera | 14L |
| B84/3x1 | Backup camera connector | 13J |
| E3 | Left taillamp | 6L |
| E3e3 | Left backup lamp | 6L |
| E7/1 | Left backup lamp | 8L |
| E7/1x1 | Left backup lamp connector | 7J |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N66/10 | Backup camera voltage supply module | 4A |
| N66/10 | Backup camera voltage supply module | 12A |
| W6 | Ground (left wheelhouse in luggage compartment) | 2E |
| Z38 | Backup lamp connector sleeve | 3E |
| Z6/92 | Trunk lid ground connector sleeve | 7G |