Remove/install Digital Audio Broadcasting control unit (DAB) - AR82.60-P-2001SX
MODEL 216 with CODE (537) Digital radio
MODEL 221 with CODE (537) Digital radio except CODE (Z07) Top protection
Shown on model 221
Fig 1: Identifying Digital Audio Broadcasting Control Unit Remove/Install Components - Shown On Model 221
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on avoiding damage to fiber optic cables during repair work | AH82.60-P-0001-05AK | ||
| 1 | Buffer the basic data of the Digital Audio Broadcasting control unit (N87/3) in STAR DIAGNOSIS | When replacing the Digital Audio broadcasting control unit (N87/3). |
|
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 2 | Switch off ignition and withdraw transmitter key or Keyless Go start/stop button from the EIS [EZS] control unit | ||
| 3 | Detach left paneling at side in luggage compartment (1), as shown, and swivel to side as far as possible until the Digital Audio Broadcasting control unit (N87/3) is accessible | AR68.30-P-4600SX | |
| 4 | Detach electrical connector (5) and electrical connector with fiber optic cable connector (6) | ||
| 5 | Remove screws (2) and raise Digital Audio Broadcasting control unit (N87/3) with the bracket (3) far enough until the felt adhesive tapes (4) can be detached | ||
| 6 | Detach felt adhesive tapes (4) and remove Digital Audio Broadcasting control unit (N87/3) from trunk | ||
| 7 | Remove bracket (3) from Digital Audio Broadcasting control unit (N87/3) | When replacing the Digital Audio Broadcasting control unit (N87/3) or the bracket (3). | |
| 8 | Install in the reverse order |