Remove/install shield at transmission - AR27.40-P-0700-01SX
HOUSING
| Number | Designation | Transmission 722.6 except 722.660/661/662/ 663/666/673/674 | Transmission 722.9 | |
|---|---|---|---|---|
| BA27.40-P-1019-01A | Bolt, leaf spring to transmission housing | Nm | 8 | 5 |
HOUSING
| Number | Designation | Transmission 722.6 in model 216, 221 | |
|---|---|---|---|
| BA27.40-P-1003-01B | Bolt, heat shield to transmission housing | Nm | 10 |
- Remove bolt (1) and remove shield (2) downwards.
- Press cable holder (4) out of shield (2) and remove shield (2).
The shield (2) must be positioned under the leaf spring (3).
The leaf spring (3) must be modified if a new transmission is installed.