Multi-disks for B1, K1 and K3 changed - BT27.50-P-0013-01A

TRANSMISSION 722.6## ## as of 3947440 as of 2.9.02 

Phased in as of 02.09.02 the multi-disks for B1, K1 and K3 will be changed. The multi-disks will only have a friction lining on one side (single-sided) as a cost-cutting measure.

The setting procedure for the clearance and the special tool required for this procedure remain unchanged.

Single-sided multi-disks cannot be replaced with double sided multi-disks and vice versa.