Additional shim between deep-groove ball bearing and output flange - BT27.10-P-0005-01A

Transmission 722.6 

TRANSMISSION 722.6## (except 722.66) ## as of 1658778 as of 19.7.99 

TRANSMISSION 722.6## ## as of 1658778 as of 19.7.99 

In order to avoid load change noise during driving, and to provide an additional safeguard against slackening of the twelve-point nut, a shim with a thickness of 0.3 mm is installed between the deep-groove ball bearing and the output flange.