Remove and install right center nozzle air flap actuator motor - AR83.10-P-2016SX

MODEL 216.3, 221.0/1 

Shown on model 221 

Fig 1: Identifying Right Center Air Outlet Flap Actuator Motor, Insulation Mat, Electrical Connector With Bolt

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove instrument panel	Model 216	AR68.10-P-1000SC
		Model 221	AR68.10-P-1000SX
2	Fold insulation mat (1) to side
3	Remove right center air outlet flap actuator motor (M2/13) from air conditioner housing	Installation  : When replacing, match the position of the right center air vent flap drive shaft to the position of the actuating drive on the right center air flap actuator motor (M2/13).
4	Install in the reverse order
5	Teach in and normalize right center air outlet flap actuator motor (M2/13)	Menu item: Control unit adaptations, teach in actuator motors, normalize actuator motors.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnostic system	*WH58.30-Z-1048-13A

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnostic system, Compact Passenger Car	6511 1801 00