Remove and install right blending air actuator motor - AR83.10-P-2003SX

MODEL 216.3, 221.0/1 

Lower right blend air flap actuator motor 

Shown on model 221 

Fig 1: Identifying Right Blending Air Actuator Motor Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove glove compartment		AR68.10-P-1400SX
2	Turn around insulation mat (1) toward top
3	Remove lower right blend air flap actuator motor (M2/33) from air conditioner housing	Installation  : Match the position of the connection of the lower right blend air flaps to the position of the actuating drive at the lower right blend air flap actuator motor (M2/33).
4	Install in the reverse order
5	Teach in and normalize lower right blend air flap actuator motor (M2/33)	Menu item: control unit adaptations, teach in actuator motors, normalize actuator motors.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnostic system	*WH58.30-Z-1048-13A