Release fitting sleeves on flex disks - AR41.10-P-0050-09SX

AR41.10-P-0050-09SX	Release fitting sleeves on flex disks
	Drift for loosening fitting sleeves in flex disks.	WF58.50-P-4110-01A

Propeller shaft installed 

1. 1.1 Using drift, loosen fitting sleeves of flex disks from flange of transmission or rear axle center assembly.
   Fig 1: Loosening Fitting Sleeves Of Flex Disks (Installed)

   Courtesy of MERCEDES-BENZ USA

   Propeller shaft removed 

2. 1.2 Loosen fitting sleeves of flex disks from propeller shaft using drift.
   Fig 2: Loosening Fitting Sleeves Of Flex Disks (Removed)

   Courtesy of MERCEDES-BENZ USA