Connect sections of propeller shaft - AR41.10-P-0050-05SX

AR41.10-P-0050-05SX	Connect sections of propeller shaft
	Long-life grease (NLGI grade 2)	BB00.40-P-0266-02A

1. Coat the splined profile with long-life grease before assembly.
2. Connect sections of propeller shaft.

   The humps on the front half of the propeller shaft must be between the two humps on the linkage arm (arrows). Ensure the rubber seal is properly installed.

Position of propeller shaft without clamp connection 

Fig 1: Identifying Position Of Propeller Shaft Without Clamp Connection

Courtesy of MERCEDES-BENZ USA

Position of propeller shaft with clamp connection 

Fig 2: Identifying Position Of Propeller Shaft With Clamp Connection

Courtesy of MERCEDES-BENZ USA