Remove/install sensors for Blind Spot Assist - AR54.71-P-0100CW

MODEL 204 with CODE (234) Blind Spot Assist 

Shown on model 207.3 with engine 271 

Fig 1: Identifying Blind Spot Assist Sensors Remove/Install Components - Shown On Model 207.3

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Lift vehicle on lifting platform.
2	Remove cover (1)	When removing right rear bumper intelligent wheel sensor (B29/5) With engine 271, 651.
3	Detach electrical connection (2) for left rear bumper intelligent wheel sensor (B29/4) or right rear bumper intelligent wheel sensor (B29/5)
4	Pull left rear bumper intelligent wheel sensor (B29/4) or right rear bumper intelligent wheel sensor (B29/5) out of bracket (3) and remove
5	Install in the reverse order