Check And Correct Power Steering Fluid Level - AP46.00-D-4611A

MODEL 906 

Shown on oil reservoir with oil dipstick in model 906 

Courtesy of MERCEDES-BENZ USA

	Check
1.1	Remove oil reservoir cap (1)	Only on oil reservoir without separate oil dipstick (2) Check cap seal for damage and replace if necessary.
1.2	Remove oil dipstick (2).	Only on oil reservoir with separate oil dipstick (2)
2.1	Check oil level	The oil reservoir is filled correctly when the oil is between the "Min." and "Max." mark (arrow) at approx. 20 °C.
2.2	Check oil level	Only on oil reservoir with oil dipstick (2) on cap (1) and with separate oil dipstick (2) Clean oil dipstick (2) with a lint free rag, insert fully, pull out again and read off oil level. The oil reservoir is filled correctly when the oil is between the "Min." and "Max." mark corresponding to oil temperature.
3	Adjust to correct level
	Automatic transmission fluids (ATF, type A, suffix A)	MODEL 906	BB00.40-P-0236-02A
	Steering gear oils (ATF)	MODEL 906	BB00.40-P-0236-03A
4.1	Mount and tighten cap (1)	Only on oil reservoir without separate oil dipstick (2)
4.2	Insert oil dipstick (2).	Only on oil reservoir with separate oil dipstick (2)