Specified Transmission Oils (Commercial Vehicle, Van) - Overview - BB00.40-P-0231-02A
Status 657555
Model all
NOTE:
For commercial vehicle axle applications in the service fill area 235.6 can be used equivalently to 235.0.
| Commercial vehicles, vans - axles, sheets 235.0 up to 235.31 | ||||||||
|---|---|---|---|---|---|---|---|---|
| Major assembly | SAE grade | Sheet no. 235 | ||||||
| .0 | .1 | .5 | .6 | .8 | .20 | .31 | ||
| Hypoid differential D741.160, D746.209/301/302/305, D748.595 |
75W-90, 80W-90, 85W-90, 90 | • | ||||||
| all other hypoid differentials | 75W-90, 80W-90, 85W-90, 90 | ◦ | ◦ | • | • | |||
| Planetary axle | 85W-90, 90 | ◦ | ◦ | • | • | |||
| Pinion shaft | 80, 80W, 80W/85W (Hot zones SAE 90, 85W-90) | • | • | |||||
| Hypoid differential D741.161/421/422/423/453/454/455 |
75W-85 | ◦ | • | |||||
| Commercial vehicles, vans - transmissions, sheets 235.1 up to 235.41 | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Major assembly | SAE grade | Sheet no. 235 | ||||||||||||||||||||||||||||||||
| .1 | .3 | .4 | .5 | .9 | .10 | .11 | .12 | .13 | .27 | .28 | .29 | .41 | ||||||||||||||||||||||
| ZF transfer case, Fuller transmission | 80, 80W, 80W/85W (Hot zones SAE 90, 85W-90) | • | • | |||||||||||||||||||||||||||||||
| Transfer case | 80W/85W | ◦ | • | • | ||||||||||||||||||||||||||||||
| MB transfer case (5) | 80W | • | • | |||||||||||||||||||||||||||||||
| Transfer case Transfer case 1600 mod. des. D750.807 Transfer case 2800 mod. des. D750.854 Transfer case 3000 Z mod. des.D750.855 |
80W/85W, 75W-90 | ◦(9) | ◦(9) | • | ||||||||||||||||||||||||||||||
| Transfer case Transfer case 1000 Z - mod. des. D750.010 Transfer case 1000 (permanent) - mod. des. D750.011 |
• | |||||||||||||||||||||||||||||||||
| MB manual transmission | ||||||||||||||||||||||||||||||||||
| Model 447, 639, 900, 906 with transmission 711.6 (TSG 360) | • | |||||||||||||||||||||||||||||||||
| G 1/15, 1/17, 1/18 (1) G 2/24, 2/27 G 3/36, 3/49 G 3/50 (1) G 3/60 (1), 3/61 G 3/70 |
80, 80W (1), 80W/85W (1) | •(1) | •(1) | •(1) | ||||||||||||||||||||||||||||||
| G 1/D 14 G 3/45-6, 3/55-6, 3/65, 3/90 G 4/65-6, 4/95-6, 4/95-7, 4/110-6 G 65-7 G 100/125/135 155/180/200 GO 3/60, GO 3/80, GO 4/95/105/120/130 GTO 24-5 GV 4/65-6, 4/95-6, 4/110-6 |
30, 40 80, 80W, 80W/85 W (Hot zones SAE 90, 85 W-90) | • | • | • | •(2) | |||||||||||||||||||||||||||||
| GO 160/170/190/210/230/240/250 | 80W | •(6) | •(6) | • | ||||||||||||||||||||||||||||||
| G 16/28/20/32/33 | 75W/85W | • | ||||||||||||||||||||||||||||||||
| G 140-8 mod. des. D715.310 G 141-9 mod. des. D715.571 |
• | |||||||||||||||||||||||||||||||||
| G 56/60/85 (2), G 70-6/71-6/90-6, GO 110 (2) | •(7) | •(8) | • | • | ||||||||||||||||||||||||||||||
| G 100, G 131, G 210, G 221, G 240 G 140-8 mod. des. D715.310 G 141-9 mod. des. D715.571 G 211 mod. des. D715.350/362/510 G 230 mod. des. D715.360/508 G 231 mod. des. D715.513/518 G 241 mod. des. D715.515 G 260 mod. des. D715.528/540 G 280 mod. des. D715.523/525 G 281 mod. des. D715.370/371 G 330 mod. des. D715.380/381 |
80W | •(3) | •(3) | • | ||||||||||||||||||||||||||||||
| G 85 Hybrid mod. des. D715.068 | • | |||||||||||||||||||||||||||||||||
| WSK400 | •(10) | |||||||||||||||||||||||||||||||||
| ZF manual transmission | 80, 80W, 85W, 75W/85 W (Hot zones SAE 90, 85W-90) | • | •(4) | • | • | |||||||||||||||||||||||||||||
| ZF manual transmission with ZF torque converter clutch 400 MB transmission G240 with ZF torque converter clutch 400 | • | |||||||||||||||||||||||||||||||||
| ZF 95-1115 mod. des. D710.580/581/582 | • | |||||||||||||||||||||||||||||||||
| Retarder (VOITH)* | • | • | • | |||||||||||||||||||||||||||||||
| Sprintshift transmission | 75W/85W | • | ||||||||||||||||||||||||||||||||
| AT 4 - axle drive | • | |||||||||||||||||||||||||||||||||
| • Should be used. ◦ Can be used. Change service life factors in the maintenance system (WS) and pay attention to specified service interval processors.
5.) W 4 B 035 only as of major assembly end no. 00 57 33 and modified shift plate must be installed. ATF as per Sheets 236.1, 236.8, and 236.81 may not be used in W 4 B 035.
7.) 8.) Automatic transmission fluids (ATF), sheet 236.91 and TES 295 for Allison automatic transmission. This oil permits much longer oil change intervals, in particular for Allison transmissions.
|
||||||||||||||||||||||||||||||||||
| *mileages for Voith retarder without commercial vehicle maintenance computer, every 2 years at the latest | |||
|---|---|---|---|
| Mercedes-Benz Specifications for Operating Fluids | 235.27 | 235.28 | 235.29 |
| Voith | A oils | B oils | C oils |
| Long-distance haulage (driven distance over 80 %) Climate conditions corresponding to Central Europe |
90, 000 km | 135, 000 km | 180, 000 km |
| Distribution haulage (driven distance over 50 %) | 65, 000 km | 90, 000 km | 135, 000 km |
| Construction site vehicles and logging trucks Routes with a high amount of downward slopes Usage in heights above 1, 500 m above sea level Regions with higher outside temperatures than Central Europe |
45, 000 km | 65, 000 km | 90, 000 km |
| *mileage for Voith retarder without bus maintenance computer, every 2 years at the latest | |||
|---|---|---|---|
| Mercedes-Benz Specifications for Operating Fluids | 235.27 | 235.28 | 235.29 |
| Voith | A oils | B oils | C oils |
| Main-line rail transport (driven distance over 80 %) Climate conditions corresponding to Central Europe |
135, 000 km | 180, 000 km | 240, 000 km |
| Regular service (local public transport stop & go) Amount of time driven in urban traffic higher than 50 % |
90, 000 km | 120, 000 km | 180, 000 km |
| Routes with a high amount of downward slopes Usage in heights above 1, 500 m above sea level Regions with higher outside temperatures than Central Europe |
65, 000 km | 90, 000 km | 135, 000 km |
| Commercial vehicles, vans, sheets 236.1 up to 236.91, 238.22 | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Major assembly | SAE grade | Sheet no. 236 | 238 | ||||||||||||||||||
| .1 | .2 | .3 | .6 | .7 | .8 | .9 | .11 | .12 | .14 | .15 | .81 | .91 | .22 | ||||||||
| Servo steering model 638, 639, 901, 902, 903, 904, 905, 906, 909 | ATF | • | |||||||||||||||||||
| MB manual transmission (2) G 1/15, 1/17, 1/18 G 2/24, 2/27 G 3/36, 3/40 G 3/50 G 3/60, 3/61 G 3/70 |
ATF | • | |||||||||||||||||||
| MB power steering | ATF | • | • | • | • | ||||||||||||||||
| ZF power steering | ATF | • | • | • | |||||||||||||||||
| Hydrostatic fan drive for additional engine radiator | ATF | • | • | ||||||||||||||||||
| Hydrostatic fan drive | ATF | • | • | • | |||||||||||||||||
| MB automatic transmission, except 722.6/9 | ATF | • | • | • | • | • | |||||||||||||||
| Automatic transmission 722.6 | ATF | • | |||||||||||||||||||
| Automatic transmission 722.9 | ATF | • | |||||||||||||||||||
| MB automatic transmission W 4 B 035 (1) | ATF | • | • | ||||||||||||||||||
| Voith/ZF automatic transmission | ATF | • | • | • | • | • | • | ||||||||||||||
| Allison transmission (2) | ATF | • | •(3) | ||||||||||||||||||
| Allison transmission (2) 3000 P mod. des. D723.677/678 3000 PR mod. des. D723.693/694/695 3500 P mod. des. D723.668/669 | ATF | •(3) | |||||||||||||||||||
| Fluid coupling/turbo retarder clutch (VIAB 433D, 434D) Mod. des. D715.523/525/536/381 |
ATF | • | |||||||||||||||||||
| ZF 4 HP 20 | ATF | • | |||||||||||||||||||
| AG 4 | |||||||||||||||||||||
|
• | ||||||||||||||||||||
|
|||||||||||||||||||||
| Hydraulic lowering system in model 905.613 | • | ||||||||||||||||||||
| • Should be used. ◦ Can be used. Change service life factors in the maintenance system (WS) and pay attention to specified service interval processors. 1.) Only for: G 1/18-5, G 3/50, G 3/60 without MS synchronization. 2.) Use engine oils as per sheet 235.12, SAE 30, with common oil circuit with ZF torque converter clutch 400. 3.) Only in combination with oil cooler. 4.) With intarder.
6.) Only use in exceptional cases! If no synthetic oil in accordance with 235.4 or 235.11 available.
9.) Except in Latin America. 10.) Only in temperate zones. 11.) Except in temperate zones, SAE 40. 12.) Only use in exceptional cases! If no synthetic oil as per 235.11 available. 13.) SAE 30. |
|||||||||||||||||||||
| Commercial vehicles, vans, sheet 345.0 | ||
|---|---|---|
| Major assembly | SAE grade | Sheet no. 345 |
| .0 | ||
| Power steering with outside temperatures below -25 °C: Vans T0, 901, 902, 903, 904, 905 | • | |
| • Should be used. ◦ Can be used. Change service life factors in the maintenance system (WS) and pay attention to specified service interval processors. 1.) Only for: G 1/18-5, G 3/50, G 3/60 without MS synchronization. 2.) Use engine oils as per sheet 235.12, SAE 30, with common oil circuit with ZF torque converter clutch 400. 3.) Only in combination with oil cooler. 4.) With intarder. 5.) W 4 B 035 only as of major assembly end no. 00 57 33 and modified shift plate must be installed. ATF as per Sheets 236.1, 236.8, and 236.81 may not be used in W 4 B 035. 6.) Only use in exceptional cases! If no synthetic oil in accordance with 235.4 or 235.11 available. 7.) 8.) Automatic transmission fluids (ATF), sheet 236.91 and TES 295 for Allison automatic transmission. This oil permits much longer oil change intervals, in particular for Allison transmissions. 9.) Except in Latin America. 10.) Only in temperate zones. 11.) Except in temperate zones, SAE 40. 12.) Only use in exceptional cases! If no synthetic oil as per 235.11 available. 13.) SAE 30. |
||
This table only serves as an overview!