Service Information: Replace The Clips On The Protective Strips - Si88.80-D-0002A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2018 Mercedes-Benz Sprinter 3500XD, 2018 Mercedes-Benz Sprinter 3500, 2018 Mercedes-Benz Sprinter 2500, 2017 Mercedes-Benz Sprinter 3500XD, and 2017 Mercedes-Benz Sprinter 3500. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 906.### #S up to 413437
Due to recent events we would like to notify you that generally, when performing assembly operations on the protective strips at the side, all the clips should be replaced. The reason for this is the improved quality of the clips.
Furthermore, the mounting of the new clips will result in an unwanted diffused light effect on the position lamps. To avoid this, the new cable grommets must also be installed.
To mount the new cable grommets, make a cut far enough into them crosswise at the grommet so that the connector plug can then be fitted.
Please notify your over-the-counter sales of this procedure.
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| A 002 991 85 70 | Clip | if required |
| A 906 546 13 61 | Cable grommet | if required |