LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> Sprinter 2500, Van Passenger >> Repair and Diagnosis >> Collision >> General Collision Information >> Front End & Fire Wall -- 906 Chassis >> Testing & Repair >> Prepare Front-End Paneling For Installing Additional Turn Signal Lamps - Ar62.10-D-5750-03A

Prepare Front-End Paneling For Installing Additional Turn Signal Lamps - Ar62.10-D-5750-03A

  1. Scribe holes for additional turn signal lamps according to drawing, drill and deburr.

    IMPORTANT Drill Ø 6.1 mm holes (11, 12). Drill out hole (13) to Ø 26 mm.

  2. After painting front-end paneling, pull rivet nuts into holes (11, 12).
    G10888358Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals