Install Upper Front Longitudinal Member - Ar62.20-D-1286-03H
The following operation steps are shown on model 906.733 on the left side of the vehicle and must be performed analogously on the right side in the event of damage.
- Install upper front longitudinal member (1), fit and fix in place.
- Coat insides of riveted joints with zinc dust paint.
- Install upper front longitudinal member (1), fit and fix in place.
- Upper front longitudinal member (1)
(areas E and D).
- Upper front longitudinal member (1)
(areas A, B and C).
- Upper front longitudinal member (1)
(area F).
- Clean weld joints.
- Install bracket (2) on upper front longitudinal member (1), fit and fix in place.
- Rivet bracket (2) on upper front longitudinal member (1) with 4.8 x 8 steel/steel blind rivet (area G).