LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> Sprinter 2500, Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - Safety Precautions, Testing & Repair, Maintenance, Retrofitting & Conversion - 906 Chassis >> Testing & Repair >> Remove/Install Fog Lamps - Ar82.10-D-1835M

Remove/Install Fog Lamps - Ar82.10-D-1835M

MODEL 906 with CODE L16 (Fog lamps Halogen) with CODE XM0 (Facelift) 

G10889839Courtesy of MERCEDES-BENZ USA

Shown on right side of vehicle 

REMOVINGINSTALLING Remove/install     
1 Unclip left or right cover (1) at front bumper (2) and remove SPECIAL TOOL Mounting wedge Fig 1
2 Remove screws/bolts (3) and guide out left front fog lamp (E5/1) or right front fog lamp (E5/2) at front bumper (2) until electrical connector (4) is accessible    
3 Disconnect electrical connector (4) and remove left front fog lamp (E5/1) or right front fog lamp (E5/2)    
4 Install in the reverse order    
5 Check front fog lamp setting and correct, if necessary    
REFER TO MAINTENANCE     AP82.10-D-8260-04B 
Fig 1: Mounting Wedge (110 589 03 59 00)
G10889840Courtesy of MERCEDES-BENZ USA