Remove Door Hinge Mount - Ar64.30-D-0850-01H

Courtesy of MERCEDES-BENZ USA

The following operation steps are shown on model 906.733 on the left side of the vehicle and must be performed analogously on the right side in the event of damage.

1. Expose spot welds on door hinge bracket (1) (areas A, B and C).
2. Mill off spot welds on door hinge bracket (1) (areas A, B and C).
3. Remove damaged door hinge bracket (1).
4. Grind mating surfaces down to bare metal in the crosshatched areas.
5. Remove shavings and drill chips.