Charge Air Pipe/Charge Air Cooling - BA09.41-N-1000-01O
ENGINE 642
CHARGE AIR PIPE/CHARGE AIR COOLING TORQUE SPECIFICATIONS - ENGINE 642
| Number | Designation | ENGINE 642 | ||
|---|---|---|---|---|
| BA09.41-N-1001-01O | Bolt, engine charge air duct on turbocharger to holder | Nm | 9 | |
| BA09.41-N-1002-01O | Bolt, holder to charge air distribution line | Nm | 9 | |
| BA09.41-N-1003-01O | Bolt from turbocharger noise damper to holder | Nm | 9 | |
| BA09.41-N-1004-01O | Bolt from engine charge air duct upstream of charge air cooler to cylinder head cover | Nm | 9 | |
| BA09.41-N-1005-01O | Bolt from engine charge air duct upstream of charge air cooler to holder | Nm | 9 | |
| BA09.41-N-1006-01O | Bolt from engine charge air duct upstream of charge air cooler to engine support | Nm | 9 | |
| BA09.41-N-1007-01O | Bolt, engine charge air duct downstream of charge air cooler to throttle valve actuator | Nm | 9 | |
| BA09.41-N-1008-01O | Bolt, throttle valve actuator holder to cylinder head | Nm | 9 | |
| BA09.41-N-1009-01O | Bolt, throttle valve actuator to mixing chamber | Nm | 5 | |
| BA09.41-N-1010-01O | Bolt, charge air distribution line to cylinder head | Nm | 16 | |
| BA09.41-N-1011-01O | Bolt, boost air pressure sensor to mixing chamber | Nm | 6 | |
| BA09.41-N-1012-01O | Bolt, mixing chamber to charge air manifold | M6 | Nm | 9 |
| BA09.41-N-1013-01O | Bolt, mixing chamber to support brace | M8 | Nm | 20 |
| BA09.41-N-1014-01O | Nut, mixing chamber to charge air manifold | M6 | Nm | 9 |