Remove/Install Oil Supply Connection Fitting Of Turbocharger - Ar09.40-S-6023SE
ENGINES 642.896 /898 /992 /993 in MODEL 906
Fig 1: Oil Supply Connection Fitting Of Turbocharger Remove/Install Component Locations - Shown on engine 642 in model 639
REMOVE/INSTALL OIL SUPPLY CONNECTION FITTING OF TURBOCHARGER - ENGINE 642 IN MODELS 639, 906
| Remove/install | |||
| 1 | Remove turbocharger (1) | Engine 642.896/898/993 in model 906 | AR09.40-D-6020SG |
| 2 | Remove bolts (2) on oil supply connection fitting (3) | ||
| 3 | Remove oil supply connection fitting (3) | ||
| 4 | Install in the reverse order | ||
| Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| 5 | Test run engine and check engine for leaks in the area of oil supply connection fitting (3) |
TURBOCHARGER OIL SUPPLY CONNECTION FITTING TO CRANKCASE BOLT TORQUE SPECIFICATIONS - ENGINE 642 IN MODELS 639, 906
| Number | Designation | Engine 642 in model 906 | |
|---|---|---|---|
| BA09.40-N-1001-01Q | Bolt, oil supply connection fitting to crankcase | Nm | 12 |