Remove/Install Boost Pressure Sensor - Ar09.41-D-2006SG
ENGINES 642.896 /898 /993 in MODEL 906
REMOVE/INSTALL BOOST PRESSURE SENSOR - ENGINES 642.896 /898 /993 IN MODEL 906
| Remove/install | |||
| 1 | Remove mixing chamber (1) | Engine 642.896/898 | AR09.20-D-1320SG |
| 2 | Remove bolts (2) | ||
| 3 | Remove boost pressure sensor (B5/1 or B5/8) | ||
| 4 | Install in the reverse order |
BOOST AIR PRESSURE SENSOR TO MIXING CHAMBER TORQUE SPECIFICATIONS - ENGINE 642
| Number | Designation | Engine 642 | |
|---|---|---|---|
| BA09.41-N-1011-01O | Bolt, boost air pressure sensor to mixing chamber | Nm | 6 |