Install Outer Lower Section Of Corner Pillar Paneling - Ar64.30-D-5705-08H

The following operation steps are shown on model 906.633 on the left side of the vehicle and must be performed analogously on the right side in the event of damage.

1. Apply 2-component adhesive to crosshatched area.

   Observe pretreatment of bonding surfaces.

   refer to manufacturer specifications for adhesive curing and application times.

   Courtesy of MERCEDES-BENZ USA

   Courtesy of MERCEDES-BENZ USA

2. Install, fit and fix in place outer corner paneling (1).

   Align outer corner paneling (1) on through hole (arrow).

3. Outer corner paneling (1) (area E).
4. Outer corner paneling (1) (areas E1 and K).
5. Outer corner paneling (1) (area C).

   Courtesy of MERCEDES-BENZ USA

6. Outer corner paneling (1) (area D).
7. Outer corner paneling (1) (area G).
8. Clean weld joints.
9. Remove shavings.